-
ROBOSLIT® OHP
Dual Turret Slitter Rewinder - Over Head Path
-
ROBOSLIT® OHP
ROBOSLIT ®OHP Dual Turret Slitter Rewinder with Over Head Path
The overhead path of the ROBOSLIT ® OHP Dual Turret Slitter Rewinder provides a hygienic work environment, while the Dual Turret Rewind section enables much higher outputs than its duplex counterpart, on account of a 26 seconds changeover sequence.
Technical Specification
| Position , type of unwind | Separate, Overhead Path |
| Maximum web width | 1300 mm (upto 1650 mm on request) |
| Maximum unwind diameter | 1000 mm |
| Unwind core inner diameter | 76 mm and 152 mm |
| Maximum rewind diameter | 600 mm |
| Rewind core inner diameter | 76 mm |
| Minimum slit width | 50 mm (30 mm on request) |
| Layon displacement | Horizontal |
| Layon actuator | Pneumatic piston |
| Rewind splicing | Automatic |
| Tension management | Automatic, intelligent (ITM™) |
| Job setup | Manual |
| Turret structure | Cantilevered |
| Static management | Static elimination |
| Maximum machine speed | 800 m/min |
| Rewind change-over time | 26 Seconds |
| Materials handled | Plastic films, flexible packaging laminates |
Optional Features
| Shear cutting mode – tangential, for paper and aluminum foil based laminates | |
| Electro-mechanical, linear floor lift for unwind reel | |
| Pneumatic/ Vacuum splice table at unwind for registered joints | |
| Motorized ejector for displacing the rewind reels on to the off loader | |
| Auto off loader to bring the ejected reels to waist level for easier removal | |
| Trim winding unit for the compact accumulation of trim waste | |
| Rewinding on 152 mm/ 70 mm ID rewind cores | |
| Increased diameter capabilities at unwind upto 1200 mm | |
| Additional safety devices | |
| CCTV | |
| SCADA |
Comparison of ROBOSLIT ® OHP with other dual turret machines
Comparison of Technical Specifications
| Technical Specifications | ROBOSLIT ® RL | ROBOSLIT® OHP | ROBOSLIT ® FSU |
|---|---|---|---|
|
|
 |
|
| Position, type of unwind | Rear, Integral | Separate, Overhead Path | Separate, Free Standing |
| Maximum Web Width | 1300 mm (upto 1650 mm on request) | 1300 mm (upto 1650 mm on request) | 1300 mm (upto 1650 mm on request) |
| Maximum Unwind Diameter | 1000 mm | 1000 mm | 1000 mm |
| Maximum Rewind Diameter | 600 mm | 600 mm | 600 mm |
| Rewind core inner Diameter | 76 mm | 76 mm | 76 mm |
| Minimum Slit Width | 50 mm (30 mm on request) | 50 mm (30 mm on request) | 50 mm (30 mm on request) |
| Layon displacement | Horizontal | Horizontal | Horizontal |
| Layon actuator | Pneumatic piston | Pneumatic piston | Pneumatic piston |
| Rewind splicing | Automatic | Automatic | Automatic |
| Tension management | Automatic, intelligent (ITM™) | Automatic, intelligent (ITM™) | Automatic, intelligent (ITM™) |
| Job setup | Manual | Manual | Manual |
| Turret structure | Cantilevered | Cantilevered | Cantilevered |
| Static management | Static elimination | Static elimination | Static elimination |
| Maximum Machine Speed | 800 (m/min) | 800 (m/min) | 800 (m/min) |
| Rewind change-over time | 26 seconds | 26 seconds | 26 seconds |
| Materials handled | Plastic films, flexible packaging laminates | Plastic films, flexible packaging laminates | Plastic films, flexible packaging laminates |
Possibility of Optional Features
| ROBOSLIT ® RL | ROBOSLIT ® OHP | ROBOSLIT ® FSU | |
|---|---|---|---|
| Optional features ( Optional, Not offered ) |
|
|
|
| Shear cutting mode – tangential, for paper and aluminum foil based laminates | |||
| Electro-mechanical, linear floor lift for unwind reel | |||
| Pneumatic/ Vacuum splice table at unwind for registered joints | |||
| Rewinding on 152 mm/ 70 mm ID rewind cores | |||
| Motorized ejector for the displacement of rewind reels | |||
| Auto off loader to bring the ejected reels to waist level for easier removal | |||
| Trim winding unit for the compact accumulation of trim waste | |||
| Increased diameter capabilities at unwind | |||
| Increased diameter capabilities at rewind | |||
| Additional safety devices | |||
| CCTV | |||
| SCADA |
Comparison of ROBOSLIT ® OHP with Duplex counterpart
Comparison of Technical Specifications
| Technical Specifications | ULTRASLIT ® OHP | ROBOSLIT ®OHP |
|---|---|---|
 |
|
|
| Position, type of unwind | Separate, Overhead Path | Separate, Overhead Path |
| Maximum Web Width | 1300 mm (upto 1650 mm on request) | 1300 mm (upto 1650 mm on request) |
| Maximum Unwind Diameter | 1000 mm | 1000 mm |
| Maximum Rewind Diameter | 600 mm | 600 mm |
| Rewind core inner Diameter | 76 mm | 76 mm |
| Minimum Slit Width | 50 mm (30 mm on request) | 50 mm (30 mm on request) |
| Layon displacement | Horizontal | Horizontal |
| Layon actuator | Pneumatic piston | Pneumatic piston |
| Rewind splicing | Manual | Automatic |
| Tension management | Automatic, requires operator input | Automatic, intelligent (ITM™) |
| Job setup | Manual | Manual |
| Turret structure | Not applicable | Cantilevered |
| Static management | Static elimination | Static elimination |
| Maximum machine speed | 700 m/min | 800 m/min |
| Rewind change-over time | Job and operator dependant | 26 seconds |
| Materials handled | Plastic films, flexible packaging laminates | Plastic films, flexible packaging laminates |
Possibility of Optional Features
| ULTRASLIT ® OHP | ROBOSLIT ® OHP | |
|---|---|---|
| Optional features ( Optional, Not offered ) | |
|
| Shear cutting mode – tangential, for paper and aluminum foil based laminates | ||
| Electro-mechanical, linear floor lift for unwind reel | ||
| Pneumatic/ Vacuum splice table at unwind for registered joints | ||
| Rewinding on 152 mm/ 70 mm ID rewind cores | ||
| Motorized ejector for displacing the rewind reels on to the off loader | ||
| Auto off loader to bring the ejected reels to waist level for easier removal | ||
| Trim winding unit for the compact accumulation of trim waste | ||
| Increased diameter capabilities at unwind | ||
| Increased diameter capabilities at rewind | ||
| Additional safety devices | ||
| CCTV | ||
| SCADA |
Comparison of ROBOSLIT ® OHP with fully loaded version
Comparison of Technical Specifications
| Technical Specifications | ROBOSLIT ® OHP | ROBOSLIT® plus OHP |
|---|---|---|
|
 |
|
| Position, type of unwind | Separate, Overhead Path | Separate, Overhead Path |
| Maximum Web Width | 1300 mm (upto 1650 mm on request) | 1300 mm (upto 1650 mm on request) |
| Maximum Unwind Diameter | 1000 mm | 1000 mm |
| Maximum Rewind Diameter | 600 mm | 600 mm |
| Rewind core inner Diameter | 76 mm | 76 mm |
| Unwind reel loading mechanism | Optional in this model | Electro-mechanical, linear floor lift |
| Minimum Slit Width | 50 mm (30 mm on request) | 50 mm (30 mm on request) |
| Layon displacement | Horizontal | Horizontal |
| Layon actuator | Pneumatic piston | Servo Motor |
| Rewind splicing | Automatic | Automatic |
| Tension management | Automatic, intelligent (ITM™) | Automatic, intelligent (ITM™) |
| Job setup | Manual | Automatic pre-positioning |
| Turret structure | Cantilevered | Supported |
| Rewind reel displacement mechanism | Optional in this model | Motorized ejector |
| Rewind reel offloading mechanism | Optional in this model | Auto off loader |
| Static management | Static elimination | Static elimination & monitoring |
| Maximum machine speed | 800 m/min | 1000 m/min |
| Rewind change-over time | 26 seconds | 30 seconds |
| Materials handled | Plastic films, flexible packaging laminates | Plastic films, flexible packaging laminates |
Possibility of Optional Features
| ROBOSLIT ® OHP | ROBOSLIT ® plus OHP | |
|---|---|---|
| Optional features ( Optional, Not offered ) | |
|
| Shear cutting mode – tangential, for paper and aluminum foil based laminates | ||
| Fully Automatic cutter positioning as per recipe | ||
| Electro-mechanical, linear floor lift for unwind reel | Standard | |
| Pneumatic/ Vacuum splice table at unwind for registered joints | ||
| Rewinding on 152 mm/ 70 mm ID rewind cores | ||
| Motorized ejector for displacing the rewind reels on to the off loader | Standard | |
| Auto off loader to bring the ejected reels to waist level for easier removal | Standard | |
| Advanced Auto off-loader with rewind reel ejector to integrate with onward material handling solutions | ||
| Trim winding unit for the compact accumulation of trim waste | ||
| Increased diameter capabilities at unwind | ||
| Increased diameter capabilities at rewind | ||
| Additional safety devices | ||
| CCTV | ||
| SCADA |
