-
ROBOSLIT® FSU
Dual Turret Slitter Rewinder - Free Standing Unwind
-
ROBOSLIT® FSU
Dual Turret Slitter Rewinder - Free Standing Unwind
ROBOSLIT ® FSU Dual Turret Slitter Rewinder with Free Standing Unwind
In the ROBOSLIT ® FSU (Free Standing Unwind) Dual Turret Slitter Rewinder, a working platform separates the unwind section from the main machine in which the Dual Turret mechanism at the rewind accomplishes changeovers in 26 seconds, enabling coniderably higher outputs than its duplex counterpart.
Technical Specification
| Position , type of unwind | Separate, Free Standing Unwind |
| Maximum web width | 1300 mm (upto 1650 mm on request) |
| Maximum unwind diameter | 1000 mm |
| Unwind core inner diameter | 76 mm and 152 mm |
| Maximum rewind diameter | 600 mm |
| Rewind core inner diameter | 76 mm |
| Minimum slit width | 50 mm (30 mm on request) |
| Layon displacement | Horizontal |
| Layon actuator | Pneumatic piston |
| Rewind splicing | Automatic |
| Tension management | Automatic, intelligent (ITM™) |
| Job setup | Manual |
| Turret structure | Cantilevered |
| Static management | Static elimination |
| Maximum machine speed | 800 m/min |
| Rewind change-over time | 26 Seconds |
| Materials handled | Plastic films, flexible packaging laminates |
Optional Features
| Shear cutting mode – tangential, for paper and aluminum foil based laminates | |
| Electro-mechanical, linear floor lift for unwind reel | |
| Pneumatic/ Vacuum splice table at unwind for registered joints | |
| Motorized ejector for displacing the rewind reels on to the off loader | |
| Auto off loader to bring the ejected reels to waist level for easier removal | |
| Trim winding unit for the compact accumulation of trim waste | |
| Rewinding on 152 mm/ 70 mm ID rewind cores | |
| Increased diameter capabilities at unwind upto 1200 mm | |
| Additional safety devices | |
| CCTV | |
| SCADA |
Comparison of ROBOSLIT ® FSU with other dual turrent machines
Comparison of Technical Specifications
| Technical Specifications | ROBOSLIT ® RL | ROBOSLIT ® OHP | ROBOSLIT ® FSU |
|---|---|---|---|
 |
 |
|
|
| Position, type of unwind | Rear, Integral | Separate, Overhead Path | Separate, Free Standing |
| Maximum Web Width | 1300 mm (upto 1650 mm on request) | 1300 mm (upto 1650 mm on request) | 1300 mm (upto 1650 mm on request) |
| Maximum Unwind Diameter | 1000 mm | 1000 mm | 1000 mm |
| Maximum Rewind Diameter | 600 mm | 600 mm | 600 mm |
| Rewind core inner Diameter | 76 mm | 76 mm | 76 mm |
| Minimum Slit Width | 50 mm (30 mm on request) | 50 mm (30 mm on request) | 50 mm (30 mm on request) |
| Layon displacement | Horizontal | Horizontal | Horizontal |
| Layon actuator | Pneumatic piston | Pneumatic piston | Pneumatic piston |
| Rewind splicing | Automatic | Automatic | Automatic |
| Tension management | Automatic, intelligent (ITM™) | Automatic, intelligent (ITM™) | Automatic, intelligent (ITM™) |
| Job setup | Manual | Manual | Manual |
| Turret structure | Cantilevered | Cantilevered | Cantilevered |
| Static management | Static elimination | Static elimination | Static elimination |
| Maximum Machine Speed | 800 (m/min) | 800 (m/min) | 800 (m/min) |
| Rewind change-over time | 26 seconds | 26 seconds | 26 seconds |
| Materials handled | Plastic films, flexible packaging laminates | Plastic films, flexible packaging laminates | Plastic films, flexible packaging laminates |
Possibility of Optional Features
| ROBOSLIT ® RL | ROBOSLIT ® OHP | ROBOSLIT ® FSU | |
|---|---|---|---|
| Optional features ( Optional, Not offered ) | |
|
|
| Shear cutting mode – tangential, for paper and aluminum foil based laminates | |||
| Electro-mechanical, linear floor lift for unwind reel | |||
| Pneumatic/ Vacuum splice table at unwind for registered joints | |||
| Rewinding on 152 mm/ 70 mm ID rewind cores | |||
| Motorized ejector for the displacement of rewind reels | |||
| Auto off loader to bring the ejected reels to waist level for easier removal | |||
| Trim winding unit for the compact accumulation of trim waste | |||
| Increased diameter capabilities at unwind | |||
| Increased diameter capabilities at rewind | |||
| Additional safety devices | |||
| CCTV | |||
| SCADA |
Comparison of ROBOSLIT ® FSU with Duplex counterpart
Comparison of Technical Specifications
| Technical Specifications | ULTRASLIT ® FSU | ROBOSLIT ® FSU |
|---|---|---|
 |
|
|
| Position, type of unwind | Separate, Free Standing | Separate, Free Standing |
| Maximum Web Width | 1300 mm (upto 1650 mm on request) | 1300 mm (upto 1650 mm on request) |
| Maximum Unwind Diameter | 1000 mm | 1000 mm |
| Maximum Rewind Diameter | 600 mm | 600 mm |
| Rewind core inner Diameter | 76 mm | 76 mm |
| Minimum Slit Width | 50 mm (30 mm on request) | 50 mm (30 mm on request) |
| Layon displacement | Horizontal | Horizontal |
| Layon actuator | Pneumatic piston | Pneumatic piston |
| Rewind splicing | Manual | Automatic |
| Tension management | Automatic, requires operator input | Automatic, intelligent (ITM™) |
| Job setup | Manual | Manual |
| Turret structure | Not Applicable | Cantilevered |
| Static management | Static elimination | Static elimination |
| Maximum machine speed | 700 m/min | 800 m/min |
| Rewind change-over time | Job and operator dependant | 26 seconds |
| Materials handled | Plastic films, flexible packaging laminates | Plastic films, flexible packaging laminates |
Possibility of Optional Features
| ULTRASLIT ® FSU | ROBOSLIT ® FSU | |
|---|---|---|
| Optional features ( Optional, Not offered ) | |
|
| Shear cutting mode – tangential, for paper and aluminum foil based laminates | ||
| Electro-mechanical, linear floor lift for unwind reel | ||
| Pneumatic/ Vacuum splice table at unwind for registered joints | ||
| Rewinding on 152 mm/ 70 mm ID rewind cores | ||
| Motorized ejector for displacing the rewind reels on to the off loader | ||
| Auto off loader to bring the ejected reels to waist level for easier removal | ||
| Trim winding unit for the compact accumulation of trim waste | ||
| Increased diameter capabilities at unwind | ||
| Increased diameter capabilities at rewind | ||
| Additional safety devices | ||
| CCTV | ||
| SCADA |
Comparison of ROBOSLIT ® FSU with fully loaded version
Comparison of Technical Specifications
| Technical Specifications | ROBOSLIT ® FSU | ROBOSLIT ® plus FSU |
|---|---|---|
|
 |
|
| Position, type of unwind | Separate, Free Standing | Separate, Free Standing |
| Maximum Web Width | 1300 mm (upto 1650 mm on request) | 1300 mm (upto 1650 mm on request) |
| Maximum Unwind Diameter | 1000 mm | 1000 mm |
| Maximum Rewind Diameter | 600 mm | 600 mm |
| Rewind core inner Diameter | 76 mm | 76 mm |
| Unwind reel loading mechanism | Optional in this model | Electro-mechanical, linear floor lift |
| Minimum Slit Width | 50 mm (30 mm on request) | 50 mm (30 mm on request) |
| Layon displacement | Horizontal | Horizontal |
| Layon actuator | Pneumatic piston | Servo Motor |
| Rewind splicing | Manual | Automatic |
| Tension management | Automatic, intelligent (ITM™) | Automatic, intelligent (ITM™) |
| Job setup | Manual | Automatic pre-positioning |
| Turret structure | Cantilevered | Supported |
| Rewind reel displacement mechanism | Optional in this model | Motorized ejector |
| Rewind reel offloading mechanism | Optional in this model | Auto off loader |
| Static management | Static elimination | Static elimination & monitoring |
| Maximum machine speed | 800 m/min | 1000 m/min |
| Rewind change-over time | 26 seconds | 30 seconds |
| Materials handled | Plastic films, flexible packaging laminates | Plastic films, flexible packaging laminates |
Possibility of Optional Features
| ROBOSLIT ® FSU | ROBOSLIT ® plus FSU | |
|---|---|---|
| Optional features ( Optional, Not offered ) | |
|
| Shear cutting mode – tangential, for paper and aluminum foil based laminates | ||
| Fully Automatic cutter positioning as per recipe | ||
| Electro-mechanical, linear floor lift for unwind reel | Standard | |
| Pneumatic/ Vacuum splice table at unwind for registered joints | ||
| Rewinding on 152 mm/ 70 mm ID rewind cores | ||
| Motorized ejector for displacing the rewind reels on to the off loader | Standard | |
| Auto off loader to bring the ejected reels to waist level for easier removal | Standard | |
| Advanced Auto off-loader with rewind reel ejector to integrate with onward material handling solutions | ||
| Trim winding unit for the compact accumulation of trim waste | ||
| Increased diameter capabilities at unwind | ||
| Increased diameter capabilities at rewind | ||
| Additional safety devices | ||
| CCTV | ||
| SCADA |
